Role: Piping Engineer

The Piping Engineer is part of the hierarchical organization, reporting directly to Team Manager as direct discipline superior. Piping Engineer is having strong ability in technical matters with profound knowledge of applicable Engineering principles and processes with an emphasis on safe, compliant, reliable, efficient and practical solutions required for the engineering design and execution of proposals and projects.

General

• Participates in the development and implementation of engineering practices, workflows and procedures; recommends and implements resulting specs and procedures.
• Participates to reviews of work activities and projects; monitors workflow.
• Consults with and makes recommendations to SME and Project Management Teams.
• Controls key parameters (KPIs), benchmarks and efficiency figures to be applied in estimating equipment, material and man-hours.
• Contributes to optimization of engineering practices, workflows and procedures based on collected KPIs.
• Solves problems of various degrees of complexity.
• Coordinates and participates for the training programs for Designers / Engineers/Senior Engineers in the technical Discipline. Project execution
• Ensures compliance to Discipline Manual and Job Manual during project execution to ensure that all contractual requirements are been implemented and fulfilled.
• Ensures good quality of the deliverables for the design work.
• Ensures completion of WBS elements within allotted man-hours and schedule dates.
• Ensures on time quality review of Inter-discipline documents and vendor deliverables.
• Contributes to implementation of safety relevant principles, standards, rules and procedures.
• Ensures implementation of lessons learnt from previous projects.
• Manages the technical procurement activities for various types of equipment.
• Reviews and approves Vendor documents applicable for the Discipline.
• Attends to inspections as per requirement of the inspection department
• Site assistance though replying site queries.
• Able to perform MHRS calculations using Discipline calculation tool.

Technical Community

• Participates to the Discipline related technical community,
• Participates in the development of Discipline related technical standards, specifications and design criteria.
• Develops knowledge in the area of responsibility through seminars, trainings and execution of various projects Competency Management
• Contributes to the development and implementation of competitive solutions.
• Applies technical and specialist knowledge to stay up-to-date with innovations and developments in the industry and continues to offer best practice.
• In alignment with Team Manager, supports mentoring and coaching to meet current and future needs.
• Contributes to the implementation of lessons learnt within the department into workflows, procedures and standards.

Domain Knowledge

• Experience with various National and International codes
• Developing & reviewing the plant layout and piping design work regarding appropriate quality with project specifications.
• Implementation of all project specific norms and standards as defined in contract and Job Manual
  Developing and reviewing the Smartplant SP3D model at allocated plot area considering Safety Escape routes, maintenance, accessibility, operability and constructability of the facilities
• 3D modeling of equipment, Piping routing, steel structures, pipe racks / pipe-way, buildings, machine hall building, analyzer shelter, noise hood shelter, administrative building, control room, roads and access ways, escape routes, fire fighting using Smartplant SP3D.
• 3D modeling of process piping lines, utility piping lines, stress critical piping lines and vessel trims using Smartplant SP3D.
• Preparation of equipment layout, plot plan, piping general arrangement drawings (GAD), standard & special piping support drawings (SP3D/AutoCAD).
• Preparation and Participation in Smartplant SP3D Design Model Reviews
• Generation of civil work guide drawings, steel structural guide drawings, nozzle orientation drawings and platform & ladder drawings.
• Generation of Isometric drawings including self checking and releasing for AFC revision
• Preparing battery limit drawing as applicable
• Familiar with Underground Piping concept
• Checking the Smartplant SP3D. model for clash free model.
• Checking of Piping Deliverables like GAD, isometrics, MTO.
• Comments on Vendor Drawings including general equipment layout, civil work detail, structure, detail, sheeting, access drawing. Checking PIDs, Equipment arrangement drawings, Nozzle orientation drawings & Isometrics as per PIDs and process requirements.
• Checking battery limit / tie-in summary list and drawing as applicable.
• Checking piping arrangement drawings for pipe racks, process / utility areas and underground.
• Anticipation and Identification of risks and opportunities and recommend mitigations during execution.
• Collaborate with the designing team to properly implement ideas to complete a given task.
• Effective Communication skills with proactive coordination to manage interdiscipline workflow.
• Ability to identify cost optimization opportunities during project execution.
• Tool proficiency - Smartplant SP3D - SP3D ,SPR, Navis work, Microstation.

Education: MTech /ME , BTech / BE - Mechanical

Work Experience: Experience in EPC or Detail design engineering company in the engineering discipline for execution of projects in various sectors like Oil & Gas, Energy, Refining, Petrochemicals.

Experience range: 2 - 17 years Foreign Language: and Level English - Fluent
Experience in modular / modularization will be an added advantage

Role: Piping Engineer

The Piping Engineer is part of the hierarchical organization, reporting directly to Team Manager as direct discipline superior. Piping Engineer is having strong ability in technical matters with profound knowledge of applicable Engineering principles and processes with an emphasis on safe, compliant, reliable, efficient and practical solutions required for the engineering design and execution of proposals and projects.

General

• Participates in the development and implementation of engineering practices, workflows and procedures; recommends and implements resulting specs and procedures.
• Participates to reviews of work activities and projects; monitors workflow.
• Consults with and makes recommendations to SME and Project Management Teams.
• Controls key parameters (KPIs), benchmarks and efficiency figures to be applied in estimating equipment, material and man-hours.
• Contributes to optimization of engineering practices, workflows and procedures based on collected KPIs.
• Solves problems of various degrees of complexity.
• Coordinates and participates for the training programs for Designers / Engineers/Senior Engineers in the technical Discipline. Project execution
• Ensures compliance to Discipline Manual and Job Manual during project execution to ensure that all contractual requirements are been implemented and fulfilled.
• Ensures good quality of the deliverables for the design work.
• Ensures completion of WBS elements within allotted man-hours and schedule dates.
• Ensures on time quality review of Inter-discipline documents and vendor deliverables.
• Contributes to implementation of safety relevant principles, standards, rules and procedures.
• Ensures implementation of lessons learnt from previous projects.
• Manages the technical procurement activities for various types of equipment.
• Reviews and approves Vendor documents applicable for the Discipline.
• Attends to inspections as per requirement of the inspection department
• Site assistance though replying site queries.
• Able to perform MHRS calculations using Discipline calculation tool.

Technical Community

• Participates to the Discipline related technical community,
• Participates in the development of Discipline related technical standards, specifications and design criteria.
• Develops knowledge in the area of responsibility through seminars, trainings and execution of various projects Competency Management
• Contributes to the development and implementation of competitive solutions.
• Applies technical and specialist knowledge to stay up-to-date with innovations and developments in the industry and continues to offer best practice.
• In alignment with Team Manager, supports mentoring and coaching to meet current and future needs.
• Contributes to the implementation of lessons learnt within the department into workflows, procedures and standards.

Domain Knowledge

• Experience with various National and International codes
• Developing & reviewing the plant layout and piping design work regarding appropriate quality with project specifications.
• Implementation of all project specific norms and standards as defined in contract and Job Manual
  Developing and reviewing the Smartplant SP3D model at allocated plot area considering Safety Escape routes, maintenance, accessibility, operability and constructability of the facilities
• 3D modeling of equipment, Piping routing, steel structures, pipe racks / pipe-way, buildings, machine hall building, analyzer shelter, noise hood shelter, administrative building, control room, roads and access ways, escape routes, fire fighting using Smartplant SP3D.
• 3D modeling of process piping lines, utility piping lines, stress critical piping lines and vessel trims using Smartplant SP3D.
• Preparation of equipment layout, plot plan, piping general arrangement drawings (GAD), standard & special piping support drawings (SP3D/AutoCAD).
• Preparation and Participation in Smartplant SP3D Design Model Reviews
• Generation of civil work guide drawings, steel structural guide drawings, nozzle orientation drawings and platform & ladder drawings.
• Generation of Isometric drawings including self checking and releasing for AFC revision
• Preparing battery limit drawing as applicable
• Familiar with Underground Piping concept
• Checking the Smartplant SP3D. model for clash free model.
• Checking of Piping Deliverables like GAD, isometrics, MTO.
• Comments on Vendor Drawings including general equipment layout, civil work detail, structure, detail, sheeting, access drawing. Checking PIDs, Equipment arrangement drawings, Nozzle orientation drawings & Isometrics as per PIDs and process requirements.
• Checking battery limit / tie-in summary list and drawing as applicable.
• Checking piping arrangement drawings for pipe racks, process / utility areas and underground.
• Anticipation and Identification of risks and opportunities and recommend mitigations during execution.
• Collaborate with the designing team to properly implement ideas to complete a given task.
• Effective Communication skills with proactive coordination to manage interdiscipline workflow.
• Ability to identify cost optimization opportunities during project execution.
• Tool proficiency - Smartplant SP3D - SP3D ,SPR, Navis work, Microstation.

Education: MTech /ME , BTech / BE - Mechanical

Work Experience: Experience in EPC or Detail design engineering company in the engineering discipline for execution of projects in various sectors like Oil & Gas, Energy, Refining, Petrochemicals.

Experience range: 2 - 17 years Foreign Language: and Level English - Fluent
Experience in modular / modularization will be an added advantage